Dbgrid row cannot be located for updating

Rated 4.25/5 based on 800 customer reviews

Added Windows time zones support, configurable via file.

The provider can display timestamps in any specified time zone.

dbgrid row cannot be located for updating-85

dbgrid row cannot be located for updating-28

dbgrid row cannot be located for updating-54

dbgrid row cannot be located for updating-52

Create calls Create Touch Manager to create the object; A problems occurs if an exception is raised during the constructor of a TWin Control, before inherited, which will cause the Destroy procedure to raise an access violation on Touch. The code should be written as follows: if (Touch 1. It looks somewhat like QC66963 and QC70624, but both has already been fixed. Attached code: #include bcc32 -c -v qc80864Exp: Clean compile Act: Fatal F1004 qc8086424: Internal compiler error at 0x40b85d with base 0x400000 in function Foo() Fatal F1004 qc8086424: Internal compiler error in function Foo() NOTE: Problem does not happen is -v is not enabled. [QC Short Description] Access violation when evaluating #

Create calls Create Touch Manager to create the object; A problems occurs if an exception is raised during the constructor of a TWin Control, before inherited, which will cause the Destroy procedure to raise an access violation on Touch. The code should be written as follows: if (Touch 1. It looks somewhat like QC66963 and QC70624, but both has already been fixed. Attached code: #include bcc32 -c -v qc80864Exp: Clean compile Act: Fatal F1004 qc8086424: Internal compiler error at 0x40b85d with base 0x400000 in function Foo() Fatal F1004 qc8086424: Internal compiler error in function Foo() NOTE: Problem does not happen is -v is not enabled. [QC Short Description] Access violation when evaluating #

Create calls Create Touch Manager to create the object; A problems occurs if an exception is raised during the constructor of a TWin Control, before inherited, which will cause the Destroy procedure to raise an access violation on Touch. The code should be written as follows: if (Touch 1. It looks somewhat like QC66963 and QC70624, but both has already been fixed. Attached code: #include bcc32 -c -v qc80864Exp: Clean compile Act: Fatal F1004 qc8086424: Internal compiler error at 0x40b85d with base 0x400000 in function Foo() Fatal F1004 qc8086424: Internal compiler error in function Foo() NOTE: Problem does not happen is -v is not enabled. [QC Short Description] Access violation when evaluating #[[

Create calls Create Touch Manager to create the object; A problems occurs if an exception is raised during the constructor of a TWin Control, before inherited, which will cause the Destroy procedure to raise an access violation on Touch. The code should be written as follows: if (Touch 1. It looks somewhat like QC66963 and QC70624, but both has already been fixed. Attached code: #include bcc32 -c -v qc80864Exp: Clean compile Act: Fatal F1004 qc8086424: Internal compiler error at 0x40b85d with base 0x400000 in function Foo() Fatal F1004 qc8086424: Internal compiler error in function Foo() NOTE: Problem does not happen is -v is not enabled. [QC Short Description] Access violation when evaluating #$009e [QC Description] When evaluating the expression #$009e in the Evaluate/Modify dialog I'm getting an access violation. Have tried both with and via the IDE with various options but without success. type // ************************************************************************ // // The following types, referred to in the WSDL document are not being represented // in this file. QC Entry 86832 - Create a new C Builder VCL application (with or without Forms, doesn't matter) - Create a new Delphi unit, insert this code: // ----- unit Unit1; interface procedure Take String (Arg: String; Ansi Arg: Ansi String; Utf8Arg: UTF8String); implementation procedure Take String (Arg: String; Ansi Arg: Ansi String; Utf8Arg: UTF8String); begin Arg := Ansi Arg UTF8Arg; // [QC Short Description] Code formatter marks all text as modified. - After exectuting the code is formated, but all the source code is marked as edited/modified (yellow line at left side of the edit window), and not only the lines modified. PAS) - Select a block of code and invoke the code formatter (ie: Ctrl D). DLL ---------------------------------------- System. Xml Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System. ---------------------------------------- System Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/---------------------------------------- Borland. Shared Assembly Version: 15.0.0.0 Win32 Version: 15.0.3890.34076 Code Base: file:///C:/Program Files (x86)/Embarcadero/RAD Studio/8.0/bin/Borland.

QC Entry 84322 You can reproduce this bug easily when you do the step in non debug mode. They are either aliases[@] of other types represented or were referred // to but never[! The types from the latter category // typically map to predefined/known XML or Embarcadero types; however, they could also // indicate incorrect WSDL documents that failed to declare or import a schema type. The very first time I used I was scared that it modified others areas of code. - After exectuting the code is formated, but all the source code is marked as edited/modified (yellow line at left side of the edit window), and not only the lines modified. Globalization Assembly Version: 15.0.0.0 Win32 Version: 15.0.3890.34076 Code Base: file:///C:/Program Files (x86)/Embarcadero/RAD Studio/8.0/bin/Borland. DLL ---------------------------------------- System. Configuration Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System. ---------------------------------------- doqbtc20 Assembly Version: 15.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/---------------------------------------- Borland.

// ************************************************************************ // // ! The very first time I used I was scared that it modified others areas of code. Delphi Assembly Version: 15.0.0.0 Win32 Version: 15.0.3890.34076 Code Base: file:///C:/Program Files (x86)/Embarcadero/RAD Studio/8.0/bin/Borland.

A benefit of using CGrid View is that when the user browser disables Java Script, the sorting and pagination automatically degenerate to normal page requests and are still functioning as expected.

CGrid View should be used together with a data provider, preferably a CActive Data Provider.

||

Create calls Create Touch Manager to create the object; A problems occurs if an exception is raised during the constructor of a TWin Control, before inherited, which will cause the Destroy procedure to raise an access violation on Touch. The code should be written as follows: if (Touch 1. It looks somewhat like QC66963 and QC70624, but both has already been fixed. Attached code: #include bcc32 -c -v qc80864Exp: Clean compile Act: Fatal F1004 qc8086424: Internal compiler error at 0x40b85d with base 0x400000 in function Foo() Fatal F1004 qc8086424: Internal compiler error in function Foo() NOTE: Problem does not happen is -v is not enabled. [QC Short Description] Access violation when evaluating #$009e [QC Description] When evaluating the expression #$009e in the Evaluate/Modify dialog I'm getting an access violation. Have tried both with and via the IDE with various options but without success. type // ************************************************************************ // // The following types, referred to in the WSDL document are not being represented // in this file. QC Entry 86832 - Create a new C Builder VCL application (with or without Forms, doesn't matter) - Create a new Delphi unit, insert this code: // ----- unit Unit1; interface procedure Take String (Arg: String; Ansi Arg: Ansi String; Utf8Arg: UTF8String); implementation procedure Take String (Arg: String; Ansi Arg: Ansi String; Utf8Arg: UTF8String); begin Arg := Ansi Arg UTF8Arg; // [QC Short Description] Code formatter marks all text as modified. - After exectuting the code is formated, but all the source code is marked as edited/modified (yellow line at left side of the edit window), and not only the lines modified. PAS) - Select a block of code and invoke the code formatter (ie: Ctrl D). DLL ---------------------------------------- System. Xml Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System. ---------------------------------------- System Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/---------------------------------------- Borland. Shared Assembly Version: 15.0.0.0 Win32 Version: 15.0.3890.34076 Code Base: file:///C:/Program Files (x86)/Embarcadero/RAD Studio/8.0/bin/Borland. QC Entry 84322 You can reproduce this bug easily when you do the step in non debug mode. They are either aliases[@] of other types represented or were referred // to but never[! The types from the latter category // typically map to predefined/known XML or Embarcadero types; however, they could also // indicate incorrect WSDL documents that failed to declare or import a schema type. The very first time I used I was scared that it modified others areas of code. - After exectuting the code is formated, but all the source code is marked as edited/modified (yellow line at left side of the edit window), and not only the lines modified. Globalization Assembly Version: 15.0.0.0 Win32 Version: 15.0.3890.34076 Code Base: file:///C:/Program Files (x86)/Embarcadero/RAD Studio/8.0/bin/Borland. DLL ---------------------------------------- System. Configuration Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System. ---------------------------------------- doqbtc20 Assembly Version: 15.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/---------------------------------------- Borland. // ************************************************************************ // // ! The very first time I used I was scared that it modified others areas of code. Delphi Assembly Version: 15.0.0.0 Win32 Version: 15.0.3890.34076 Code Base: file:///C:/Program Files (x86)/Embarcadero/RAD Studio/8.0/bin/Borland. A benefit of using CGrid View is that when the user browser disables Java Script, the sorting and pagination automatically degenerate to normal page requests and are still functioning as expected.CGrid View should be used together with a data provider, preferably a CActive Data Provider.

]]9e [QC Description] When evaluating the expression #[[

Create calls Create Touch Manager to create the object; A problems occurs if an exception is raised during the constructor of a TWin Control, before inherited, which will cause the Destroy procedure to raise an access violation on Touch. The code should be written as follows: if (Touch 1. It looks somewhat like QC66963 and QC70624, but both has already been fixed. Attached code: #include bcc32 -c -v qc80864Exp: Clean compile Act: Fatal F1004 qc8086424: Internal compiler error at 0x40b85d with base 0x400000 in function Foo() Fatal F1004 qc8086424: Internal compiler error in function Foo() NOTE: Problem does not happen is -v is not enabled. [QC Short Description] Access violation when evaluating #$009e [QC Description] When evaluating the expression #$009e in the Evaluate/Modify dialog I'm getting an access violation. Have tried both with and via the IDE with various options but without success. type // ************************************************************************ // // The following types, referred to in the WSDL document are not being represented // in this file. QC Entry 86832 - Create a new C Builder VCL application (with or without Forms, doesn't matter) - Create a new Delphi unit, insert this code: // ----- unit Unit1; interface procedure Take String (Arg: String; Ansi Arg: Ansi String; Utf8Arg: UTF8String); implementation procedure Take String (Arg: String; Ansi Arg: Ansi String; Utf8Arg: UTF8String); begin Arg := Ansi Arg UTF8Arg; // [QC Short Description] Code formatter marks all text as modified. - After exectuting the code is formated, but all the source code is marked as edited/modified (yellow line at left side of the edit window), and not only the lines modified. PAS) - Select a block of code and invoke the code formatter (ie: Ctrl D). DLL ---------------------------------------- System. Xml Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System. ---------------------------------------- System Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/---------------------------------------- Borland. Shared Assembly Version: 15.0.0.0 Win32 Version: 15.0.3890.34076 Code Base: file:///C:/Program Files (x86)/Embarcadero/RAD Studio/8.0/bin/Borland.

QC Entry 84322 You can reproduce this bug easily when you do the step in non debug mode. They are either aliases[@] of other types represented or were referred // to but never[! The types from the latter category // typically map to predefined/known XML or Embarcadero types; however, they could also // indicate incorrect WSDL documents that failed to declare or import a schema type. The very first time I used I was scared that it modified others areas of code. - After exectuting the code is formated, but all the source code is marked as edited/modified (yellow line at left side of the edit window), and not only the lines modified. Globalization Assembly Version: 15.0.0.0 Win32 Version: 15.0.3890.34076 Code Base: file:///C:/Program Files (x86)/Embarcadero/RAD Studio/8.0/bin/Borland. DLL ---------------------------------------- System. Configuration Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System. ---------------------------------------- doqbtc20 Assembly Version: 15.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/---------------------------------------- Borland.

// ************************************************************************ // // ! The very first time I used I was scared that it modified others areas of code. Delphi Assembly Version: 15.0.0.0 Win32 Version: 15.0.3890.34076 Code Base: file:///C:/Program Files (x86)/Embarcadero/RAD Studio/8.0/bin/Borland.

A benefit of using CGrid View is that when the user browser disables Java Script, the sorting and pagination automatically degenerate to normal page requests and are still functioning as expected.

CGrid View should be used together with a data provider, preferably a CActive Data Provider.

||

Create calls Create Touch Manager to create the object; A problems occurs if an exception is raised during the constructor of a TWin Control, before inherited, which will cause the Destroy procedure to raise an access violation on Touch. The code should be written as follows: if (Touch 1. It looks somewhat like QC66963 and QC70624, but both has already been fixed. Attached code: #include bcc32 -c -v qc80864Exp: Clean compile Act: Fatal F1004 qc8086424: Internal compiler error at 0x40b85d with base 0x400000 in function Foo() Fatal F1004 qc8086424: Internal compiler error in function Foo() NOTE: Problem does not happen is -v is not enabled. [QC Short Description] Access violation when evaluating #$009e [QC Description] When evaluating the expression #$009e in the Evaluate/Modify dialog I'm getting an access violation. Have tried both with and via the IDE with various options but without success. type // ************************************************************************ // // The following types, referred to in the WSDL document are not being represented // in this file. QC Entry 86832 - Create a new C Builder VCL application (with or without Forms, doesn't matter) - Create a new Delphi unit, insert this code: // ----- unit Unit1; interface procedure Take String (Arg: String; Ansi Arg: Ansi String; Utf8Arg: UTF8String); implementation procedure Take String (Arg: String; Ansi Arg: Ansi String; Utf8Arg: UTF8String); begin Arg := Ansi Arg UTF8Arg; // [QC Short Description] Code formatter marks all text as modified. - After exectuting the code is formated, but all the source code is marked as edited/modified (yellow line at left side of the edit window), and not only the lines modified. PAS) - Select a block of code and invoke the code formatter (ie: Ctrl D). DLL ---------------------------------------- System. Xml Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System. ---------------------------------------- System Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/---------------------------------------- Borland. Shared Assembly Version: 15.0.0.0 Win32 Version: 15.0.3890.34076 Code Base: file:///C:/Program Files (x86)/Embarcadero/RAD Studio/8.0/bin/Borland. QC Entry 84322 You can reproduce this bug easily when you do the step in non debug mode. They are either aliases[@] of other types represented or were referred // to but never[! The types from the latter category // typically map to predefined/known XML or Embarcadero types; however, they could also // indicate incorrect WSDL documents that failed to declare or import a schema type. The very first time I used I was scared that it modified others areas of code. - After exectuting the code is formated, but all the source code is marked as edited/modified (yellow line at left side of the edit window), and not only the lines modified. Globalization Assembly Version: 15.0.0.0 Win32 Version: 15.0.3890.34076 Code Base: file:///C:/Program Files (x86)/Embarcadero/RAD Studio/8.0/bin/Borland. DLL ---------------------------------------- System. Configuration Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System. ---------------------------------------- doqbtc20 Assembly Version: 15.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/---------------------------------------- Borland. // ************************************************************************ // // ! The very first time I used I was scared that it modified others areas of code. Delphi Assembly Version: 15.0.0.0 Win32 Version: 15.0.3890.34076 Code Base: file:///C:/Program Files (x86)/Embarcadero/RAD Studio/8.0/bin/Borland. A benefit of using CGrid View is that when the user browser disables Java Script, the sorting and pagination automatically degenerate to normal page requests and are still functioning as expected.CGrid View should be used together with a data provider, preferably a CActive Data Provider.

]]9e in the Evaluate/Modify dialog I'm getting an access violation. Have tried both with and via the IDE with various options but without success. type // ************************************************************************ // // The following types, referred to in the WSDL document are not being represented // in this file. QC Entry 86832 - Create a new C Builder VCL application (with or without Forms, doesn't matter) - Create a new Delphi unit, insert this code: // ----- unit Unit1; interface procedure Take String (Arg: String; Ansi Arg: Ansi String; Utf8Arg: UTF8String); implementation procedure Take String (Arg: String; Ansi Arg: Ansi String; Utf8Arg: UTF8String); begin Arg := Ansi Arg UTF8Arg; // [QC Short Description] Code formatter marks all text as modified. - After exectuting the code is formated, but all the source code is marked as edited/modified (yellow line at left side of the edit window), and not only the lines modified. PAS) - Select a block of code and invoke the code formatter (ie: Ctrl D). DLL ---------------------------------------- System. Xml Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System. ---------------------------------------- System Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/---------------------------------------- Borland. Shared Assembly Version: 15.0.0.0 Win32 Version: 15.0.3890.34076 Code Base: file:///C:/Program Files (x86)/Embarcadero/RAD Studio/8.0/bin/Borland.

QC Entry 84322 You can reproduce this bug easily when you do the step in non debug mode. They are either aliases[@] of other types represented or were referred // to but never[! The types from the latter category // typically map to predefined/known XML or Embarcadero types; however, they could also // indicate incorrect WSDL documents that failed to declare or import a schema type. The very first time I used I was scared that it modified others areas of code. - After exectuting the code is formated, but all the source code is marked as edited/modified (yellow line at left side of the edit window), and not only the lines modified. Globalization Assembly Version: 15.0.0.0 Win32 Version: 15.0.3890.34076 Code Base: file:///C:/Program Files (x86)/Embarcadero/RAD Studio/8.0/bin/Borland. DLL ---------------------------------------- System. Configuration Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System. ---------------------------------------- doqbtc20 Assembly Version: 15.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/---------------------------------------- Borland.

// ************************************************************************ // // ! The very first time I used I was scared that it modified others areas of code. Delphi Assembly Version: 15.0.0.0 Win32 Version: 15.0.3890.34076 Code Base: file:///C:/Program Files (x86)/Embarcadero/RAD Studio/8.0/bin/Borland.

A benefit of using CGrid View is that when the user browser disables Java Script, the sorting and pagination automatically degenerate to normal page requests and are still functioning as expected.

CGrid View should be used together with a data provider, preferably a CActive Data Provider.

9e [QC Description] When evaluating the expression #[[

Create calls Create Touch Manager to create the object; A problems occurs if an exception is raised during the constructor of a TWin Control, before inherited, which will cause the Destroy procedure to raise an access violation on Touch. The code should be written as follows: if (Touch 1. It looks somewhat like QC66963 and QC70624, but both has already been fixed. Attached code: #include bcc32 -c -v qc80864Exp: Clean compile Act: Fatal F1004 qc8086424: Internal compiler error at 0x40b85d with base 0x400000 in function Foo() Fatal F1004 qc8086424: Internal compiler error in function Foo() NOTE: Problem does not happen is -v is not enabled. [QC Short Description] Access violation when evaluating #$009e [QC Description] When evaluating the expression #$009e in the Evaluate/Modify dialog I'm getting an access violation. Have tried both with and via the IDE with various options but without success. type // ************************************************************************ // // The following types, referred to in the WSDL document are not being represented // in this file. QC Entry 86832 - Create a new C Builder VCL application (with or without Forms, doesn't matter) - Create a new Delphi unit, insert this code: // ----- unit Unit1; interface procedure Take String (Arg: String; Ansi Arg: Ansi String; Utf8Arg: UTF8String); implementation procedure Take String (Arg: String; Ansi Arg: Ansi String; Utf8Arg: UTF8String); begin Arg := Ansi Arg UTF8Arg; // [QC Short Description] Code formatter marks all text as modified. - After exectuting the code is formated, but all the source code is marked as edited/modified (yellow line at left side of the edit window), and not only the lines modified. PAS) - Select a block of code and invoke the code formatter (ie: Ctrl D). DLL ---------------------------------------- System. Xml Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System. ---------------------------------------- System Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/---------------------------------------- Borland. Shared Assembly Version: 15.0.0.0 Win32 Version: 15.0.3890.34076 Code Base: file:///C:/Program Files (x86)/Embarcadero/RAD Studio/8.0/bin/Borland.

QC Entry 84322 You can reproduce this bug easily when you do the step in non debug mode. They are either aliases[@] of other types represented or were referred // to but never[! The types from the latter category // typically map to predefined/known XML or Embarcadero types; however, they could also // indicate incorrect WSDL documents that failed to declare or import a schema type. The very first time I used I was scared that it modified others areas of code. - After exectuting the code is formated, but all the source code is marked as edited/modified (yellow line at left side of the edit window), and not only the lines modified. Globalization Assembly Version: 15.0.0.0 Win32 Version: 15.0.3890.34076 Code Base: file:///C:/Program Files (x86)/Embarcadero/RAD Studio/8.0/bin/Borland. DLL ---------------------------------------- System. Configuration Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System. ---------------------------------------- doqbtc20 Assembly Version: 15.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/---------------------------------------- Borland.

// ************************************************************************ // // ! The very first time I used I was scared that it modified others areas of code. Delphi Assembly Version: 15.0.0.0 Win32 Version: 15.0.3890.34076 Code Base: file:///C:/Program Files (x86)/Embarcadero/RAD Studio/8.0/bin/Borland.

A benefit of using CGrid View is that when the user browser disables Java Script, the sorting and pagination automatically degenerate to normal page requests and are still functioning as expected.

CGrid View should be used together with a data provider, preferably a CActive Data Provider.

||

Create calls Create Touch Manager to create the object; A problems occurs if an exception is raised during the constructor of a TWin Control, before inherited, which will cause the Destroy procedure to raise an access violation on Touch. The code should be written as follows: if (Touch 1. It looks somewhat like QC66963 and QC70624, but both has already been fixed. Attached code: #include bcc32 -c -v qc80864Exp: Clean compile Act: Fatal F1004 qc8086424: Internal compiler error at 0x40b85d with base 0x400000 in function Foo() Fatal F1004 qc8086424: Internal compiler error in function Foo() NOTE: Problem does not happen is -v is not enabled. [QC Short Description] Access violation when evaluating #$009e [QC Description] When evaluating the expression #$009e in the Evaluate/Modify dialog I'm getting an access violation. Have tried both with and via the IDE with various options but without success. type // ************************************************************************ // // The following types, referred to in the WSDL document are not being represented // in this file. QC Entry 86832 - Create a new C Builder VCL application (with or without Forms, doesn't matter) - Create a new Delphi unit, insert this code: // ----- unit Unit1; interface procedure Take String (Arg: String; Ansi Arg: Ansi String; Utf8Arg: UTF8String); implementation procedure Take String (Arg: String; Ansi Arg: Ansi String; Utf8Arg: UTF8String); begin Arg := Ansi Arg UTF8Arg; // [QC Short Description] Code formatter marks all text as modified. - After exectuting the code is formated, but all the source code is marked as edited/modified (yellow line at left side of the edit window), and not only the lines modified. PAS) - Select a block of code and invoke the code formatter (ie: Ctrl D). DLL ---------------------------------------- System. Xml Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System. ---------------------------------------- System Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/---------------------------------------- Borland. Shared Assembly Version: 15.0.0.0 Win32 Version: 15.0.3890.34076 Code Base: file:///C:/Program Files (x86)/Embarcadero/RAD Studio/8.0/bin/Borland. QC Entry 84322 You can reproduce this bug easily when you do the step in non debug mode. They are either aliases[@] of other types represented or were referred // to but never[! The types from the latter category // typically map to predefined/known XML or Embarcadero types; however, they could also // indicate incorrect WSDL documents that failed to declare or import a schema type. The very first time I used I was scared that it modified others areas of code. - After exectuting the code is formated, but all the source code is marked as edited/modified (yellow line at left side of the edit window), and not only the lines modified. Globalization Assembly Version: 15.0.0.0 Win32 Version: 15.0.3890.34076 Code Base: file:///C:/Program Files (x86)/Embarcadero/RAD Studio/8.0/bin/Borland. DLL ---------------------------------------- System. Configuration Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System. ---------------------------------------- doqbtc20 Assembly Version: 15.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/---------------------------------------- Borland. // ************************************************************************ // // ! The very first time I used I was scared that it modified others areas of code. Delphi Assembly Version: 15.0.0.0 Win32 Version: 15.0.3890.34076 Code Base: file:///C:/Program Files (x86)/Embarcadero/RAD Studio/8.0/bin/Borland. A benefit of using CGrid View is that when the user browser disables Java Script, the sorting and pagination automatically degenerate to normal page requests and are still functioning as expected.CGrid View should be used together with a data provider, preferably a CActive Data Provider.

]]9e in the Evaluate/Modify dialog I'm getting an access violation. Have tried both with and via the IDE with various options but without success. type // ************************************************************************ // // The following types, referred to in the WSDL document are not being represented // in this file. QC Entry 86832 - Create a new C Builder VCL application (with or without Forms, doesn't matter) - Create a new Delphi unit, insert this code: // ----- unit Unit1; interface procedure Take String (Arg: String; Ansi Arg: Ansi String; Utf8Arg: UTF8String); implementation procedure Take String (Arg: String; Ansi Arg: Ansi String; Utf8Arg: UTF8String); begin Arg := Ansi Arg UTF8Arg; // [QC Short Description] Code formatter marks all text as modified. - After exectuting the code is formated, but all the source code is marked as edited/modified (yellow line at left side of the edit window), and not only the lines modified. PAS) - Select a block of code and invoke the code formatter (ie: Ctrl D). DLL ---------------------------------------- System. Xml Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System. ---------------------------------------- System Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/---------------------------------------- Borland. Shared Assembly Version: 15.0.0.0 Win32 Version: 15.0.3890.34076 Code Base: file:///C:/Program Files (x86)/Embarcadero/RAD Studio/8.0/bin/Borland. QC Entry 84322 You can reproduce this bug easily when you do the step in non debug mode. They are either aliases[@] of other types represented or were referred // to but never[! The types from the latter category // typically map to predefined/known XML or Embarcadero types; however, they could also // indicate incorrect WSDL documents that failed to declare or import a schema type. The very first time I used I was scared that it modified others areas of code. - After exectuting the code is formated, but all the source code is marked as edited/modified (yellow line at left side of the edit window), and not only the lines modified. Globalization Assembly Version: 15.0.0.0 Win32 Version: 15.0.3890.34076 Code Base: file:///C:/Program Files (x86)/Embarcadero/RAD Studio/8.0/bin/Borland. DLL ---------------------------------------- System. Configuration Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System. ---------------------------------------- doqbtc20 Assembly Version: 15.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/---------------------------------------- Borland. // ************************************************************************ // // ! The very first time I used I was scared that it modified others areas of code. Delphi Assembly Version: 15.0.0.0 Win32 Version: 15.0.3890.34076 Code Base: file:///C:/Program Files (x86)/Embarcadero/RAD Studio/8.0/bin/Borland. A benefit of using CGrid View is that when the user browser disables Java Script, the sorting and pagination automatically degenerate to normal page requests and are still functioning as expected.CGrid View should be used together with a data provider, preferably a CActive Data Provider.

9e [QC Description] When evaluating the expression #[[

Create calls Create Touch Manager to create the object; A problems occurs if an exception is raised during the constructor of a TWin Control, before inherited, which will cause the Destroy procedure to raise an access violation on Touch. The code should be written as follows: if (Touch 1. It looks somewhat like QC66963 and QC70624, but both has already been fixed. Attached code: #include bcc32 -c -v qc80864Exp: Clean compile Act: Fatal F1004 qc8086424: Internal compiler error at 0x40b85d with base 0x400000 in function Foo() Fatal F1004 qc8086424: Internal compiler error in function Foo() NOTE: Problem does not happen is -v is not enabled. [QC Short Description] Access violation when evaluating #$009e [QC Description] When evaluating the expression #$009e in the Evaluate/Modify dialog I'm getting an access violation. Have tried both with and via the IDE with various options but without success. type // ************************************************************************ // // The following types, referred to in the WSDL document are not being represented // in this file. QC Entry 86832 - Create a new C Builder VCL application (with or without Forms, doesn't matter) - Create a new Delphi unit, insert this code: // ----- unit Unit1; interface procedure Take String (Arg: String; Ansi Arg: Ansi String; Utf8Arg: UTF8String); implementation procedure Take String (Arg: String; Ansi Arg: Ansi String; Utf8Arg: UTF8String); begin Arg := Ansi Arg UTF8Arg; // [QC Short Description] Code formatter marks all text as modified. - After exectuting the code is formated, but all the source code is marked as edited/modified (yellow line at left side of the edit window), and not only the lines modified. PAS) - Select a block of code and invoke the code formatter (ie: Ctrl D). DLL ---------------------------------------- System. Xml Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System. ---------------------------------------- System Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/---------------------------------------- Borland. Shared Assembly Version: 15.0.0.0 Win32 Version: 15.0.3890.34076 Code Base: file:///C:/Program Files (x86)/Embarcadero/RAD Studio/8.0/bin/Borland.

QC Entry 84322 You can reproduce this bug easily when you do the step in non debug mode. They are either aliases[@] of other types represented or were referred // to but never[! The types from the latter category // typically map to predefined/known XML or Embarcadero types; however, they could also // indicate incorrect WSDL documents that failed to declare or import a schema type. The very first time I used I was scared that it modified others areas of code. - After exectuting the code is formated, but all the source code is marked as edited/modified (yellow line at left side of the edit window), and not only the lines modified. Globalization Assembly Version: 15.0.0.0 Win32 Version: 15.0.3890.34076 Code Base: file:///C:/Program Files (x86)/Embarcadero/RAD Studio/8.0/bin/Borland. DLL ---------------------------------------- System. Configuration Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System. ---------------------------------------- doqbtc20 Assembly Version: 15.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/---------------------------------------- Borland.

// ************************************************************************ // // ! The very first time I used I was scared that it modified others areas of code. Delphi Assembly Version: 15.0.0.0 Win32 Version: 15.0.3890.34076 Code Base: file:///C:/Program Files (x86)/Embarcadero/RAD Studio/8.0/bin/Borland.

A benefit of using CGrid View is that when the user browser disables Java Script, the sorting and pagination automatically degenerate to normal page requests and are still functioning as expected.

CGrid View should be used together with a data provider, preferably a CActive Data Provider.

||

Create calls Create Touch Manager to create the object; A problems occurs if an exception is raised during the constructor of a TWin Control, before inherited, which will cause the Destroy procedure to raise an access violation on Touch. The code should be written as follows: if (Touch 1. It looks somewhat like QC66963 and QC70624, but both has already been fixed. Attached code: #include bcc32 -c -v qc80864Exp: Clean compile Act: Fatal F1004 qc8086424: Internal compiler error at 0x40b85d with base 0x400000 in function Foo() Fatal F1004 qc8086424: Internal compiler error in function Foo() NOTE: Problem does not happen is -v is not enabled. [QC Short Description] Access violation when evaluating #$009e [QC Description] When evaluating the expression #$009e in the Evaluate/Modify dialog I'm getting an access violation. Have tried both with and via the IDE with various options but without success. type // ************************************************************************ // // The following types, referred to in the WSDL document are not being represented // in this file. QC Entry 86832 - Create a new C Builder VCL application (with or without Forms, doesn't matter) - Create a new Delphi unit, insert this code: // ----- unit Unit1; interface procedure Take String (Arg: String; Ansi Arg: Ansi String; Utf8Arg: UTF8String); implementation procedure Take String (Arg: String; Ansi Arg: Ansi String; Utf8Arg: UTF8String); begin Arg := Ansi Arg UTF8Arg; // [QC Short Description] Code formatter marks all text as modified. - After exectuting the code is formated, but all the source code is marked as edited/modified (yellow line at left side of the edit window), and not only the lines modified. PAS) - Select a block of code and invoke the code formatter (ie: Ctrl D). DLL ---------------------------------------- System. Xml Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System. ---------------------------------------- System Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/---------------------------------------- Borland. Shared Assembly Version: 15.0.0.0 Win32 Version: 15.0.3890.34076 Code Base: file:///C:/Program Files (x86)/Embarcadero/RAD Studio/8.0/bin/Borland. QC Entry 84322 You can reproduce this bug easily when you do the step in non debug mode. They are either aliases[@] of other types represented or were referred // to but never[! The types from the latter category // typically map to predefined/known XML or Embarcadero types; however, they could also // indicate incorrect WSDL documents that failed to declare or import a schema type. The very first time I used I was scared that it modified others areas of code. - After exectuting the code is formated, but all the source code is marked as edited/modified (yellow line at left side of the edit window), and not only the lines modified. Globalization Assembly Version: 15.0.0.0 Win32 Version: 15.0.3890.34076 Code Base: file:///C:/Program Files (x86)/Embarcadero/RAD Studio/8.0/bin/Borland. DLL ---------------------------------------- System. Configuration Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System. ---------------------------------------- doqbtc20 Assembly Version: 15.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/---------------------------------------- Borland. // ************************************************************************ // // ! The very first time I used I was scared that it modified others areas of code. Delphi Assembly Version: 15.0.0.0 Win32 Version: 15.0.3890.34076 Code Base: file:///C:/Program Files (x86)/Embarcadero/RAD Studio/8.0/bin/Borland. A benefit of using CGrid View is that when the user browser disables Java Script, the sorting and pagination automatically degenerate to normal page requests and are still functioning as expected.CGrid View should be used together with a data provider, preferably a CActive Data Provider.

]]9e in the Evaluate/Modify dialog I'm getting an access violation. Have tried both with and via the IDE with various options but without success. type // ************************************************************************ // // The following types, referred to in the WSDL document are not being represented // in this file. QC Entry 86832 - Create a new C Builder VCL application (with or without Forms, doesn't matter) - Create a new Delphi unit, insert this code: // ----- unit Unit1; interface procedure Take String (Arg: String; Ansi Arg: Ansi String; Utf8Arg: UTF8String); implementation procedure Take String (Arg: String; Ansi Arg: Ansi String; Utf8Arg: UTF8String); begin Arg := Ansi Arg UTF8Arg; // [QC Short Description] Code formatter marks all text as modified. - After exectuting the code is formated, but all the source code is marked as edited/modified (yellow line at left side of the edit window), and not only the lines modified. PAS) - Select a block of code and invoke the code formatter (ie: Ctrl D). DLL ---------------------------------------- System. Xml Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System. ---------------------------------------- System Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/---------------------------------------- Borland. Shared Assembly Version: 15.0.0.0 Win32 Version: 15.0.3890.34076 Code Base: file:///C:/Program Files (x86)/Embarcadero/RAD Studio/8.0/bin/Borland. QC Entry 84322 You can reproduce this bug easily when you do the step in non debug mode. They are either aliases[@] of other types represented or were referred // to but never[! The types from the latter category // typically map to predefined/known XML or Embarcadero types; however, they could also // indicate incorrect WSDL documents that failed to declare or import a schema type. The very first time I used I was scared that it modified others areas of code. - After exectuting the code is formated, but all the source code is marked as edited/modified (yellow line at left side of the edit window), and not only the lines modified. Globalization Assembly Version: 15.0.0.0 Win32 Version: 15.0.3890.34076 Code Base: file:///C:/Program Files (x86)/Embarcadero/RAD Studio/8.0/bin/Borland. DLL ---------------------------------------- System. Configuration Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System. ---------------------------------------- doqbtc20 Assembly Version: 15.0.0.0 Win32 Version: 2.0.50727.4927 (Net FXsp W7.050727-4900) Code Base: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/---------------------------------------- Borland. // ************************************************************************ // // ! The very first time I used I was scared that it modified others areas of code. Delphi Assembly Version: 15.0.0.0 Win32 Version: 15.0.3890.34076 Code Base: file:///C:/Program Files (x86)/Embarcadero/RAD Studio/8.0/bin/Borland. A benefit of using CGrid View is that when the user browser disables Java Script, the sorting and pagination automatically degenerate to normal page requests and are still functioning as expected.CGrid View should be used together with a data provider, preferably a CActive Data Provider.

Leave a Reply